﻿1=english
2=Luis Cobian
3=cobian@cobiansoft.com
10=y
11=n
100=The engine has been started.
101=The engine has been stopped.
102=Loading the honeypot list "{0}".
103=Stopping and clearing all honeypots.
104=An error occurred while disposing the honeypot at the local endpoint {0}:{1}. Error: {2}
105=A honeypot for the local endpoint {0}:{1} could not be created: {2}
106=<Any local address>
107=A honeypot has been created for the local endpoint {0}:{1}.
108=An error occurred while creating a honeypot for address {0} and port {1}: {2}
109=The IPC server is now started and listening on port {0} on the loopback interface.
110=An error occurred while listening on IPC port {0} on the loopback interface: {1}
111=An error occurred in the IPC connection (client: {0}, user: {1}): {2}
112=A client has disconnected from the IPC server (client: {0}, user: {1}).
113=A client has connected to the IPC server.
114=Bad or unexpected IPC command header (client: {0}, user: {1}). Disconnecting the client.
115=IPC buffer too large (client: {0}, user: {1}). Disconnecting the client.
116=Unexpected IPC termination (client: {0}, user: {1}). Disconnecting the client.
117=<Unknown>
118=Unexpected IPC command or response (client: {0}, user: {1}). Disconnecting the client.
119=Bad IPC command or protocol (client: {0}, user: {1}). Disconnecting the client.
120=Bad IPC protocol. The client did not send HELLO. Disconnecting the client.
121=Bad IPC protocol. The client must introduce itself. Disconnecting the client.
122=An IPC client is connected: Client name: {0}, user name: {1}.
123=Encryption error on the IPC channel (client: {0}, user: {1}). Disconnecting the client.
124=The IPC buffer size cannot be negative or zero (client: {0}, user: {1}). Disconnecting the client.
125=The IPC server has started.
126=The IPC server has been disposed.
128=An exception occurred while listening for an external connection on the local endpoint {0}:{1}: {2}
129=Could not get the remote info for the connection. Local endpoint {0}:{1}.
130=Loading and initializing plugins. {0} plugins loaded.
131=A client has connected to {0}:{1}. Remote endpoint: {2}:{3}.
132=Client disconnected from {0}:{1}. Remote endpoint: {2}:{3}.
133=An error occurred while creating the IPC listener: {0}
134=An exception occurred while disposing one or more honeypots: {0}
135=One or more honeypots timed out while being disposed.
136=An exception occurred while disposing one honeypot: {0}
137=An exception occurred in plugin {0}: {1}: {2}
138=The settings file has been changed and saved.
139=A new language is being used: {0}
140=The IPC flag file could not be deleted: {0}
141=The IPC flag file could not be created: {0}
142=Attempting to change settings but no argument was provided.
143=Badly encoded settings.
144=The new language "{0}" does not exist. The new settings are being ignored.
145=The new honeypot list "{0}" does not exist and could not be created. The new settings are being ignored. Error: {1}
146=A new honeypot list will be used: {0}
147=A new IPC port will be used: {0}
148=Could not load the honeypot list "{0}": {1}
149=Restarting the server.
150=Illegal IPC port. It must be a positive integer.
151=The IPC port has been changed. New port: {0}
152=Could not change the language: {0}
153=The current list has been set to "{0}". The server is restarting.
154=Could not create a list named "{0}": {1}
155=A new honeypot list has been created: {0}
156=The honeypot list has been updated. The server will be restarted.
157=An error occurred while updating the honeypot list: {0}
158=Illegal IP address format: {0}
159=All old log files have been deleted.
160=An error occurred while deleting all old log files: {0}
161=The current log file has been deleted.
162=An error occurred while deleting the current log file: {0}
163=An error occurred while enumerating the log files: {0}
164=Plugin index: {0}
165=ID: {0}
166=Name: {0}
167=Version: {0}
168=Description: {0}
169=Author: {0}
170=Contact: {0}
171=The plugin ID cannot be empty.
172=There is no plugin with ID "{0}".
173=An error occurred while updating the settings for plugin "{0}": {1}
174=The settings for plugin "{0}" have been updated. Restarting the server.
175=Could not contact the server when checking for updates. The server may be down.
176=Languages folder: {0}
177=Application folder: {0}
178=Flags folder: {0}
179=Help folder: {0}
180=Local data folder: {0}
181=Log folder: {0}
182=Plugins folder: {0}
183=Settings folder: {0}
184=Temporary folder: {0}
500=An error occurred while loading the IPC flags: {0}
501=The client must be run in elevated mode. Exiting.
502=The IPC server was not found on port {0}. Is the main server running? Exiting.
503=An error occurred while communicating with the IPC server: {0}
504=Welcome to {0}. Version {1}.
505=Enter "help" to see a list of all available commands.
506=Unknown command.
507=An IPC error occurred: {0}. Exiting.
508=Bad or unexpected IPC command header. Connection closed.
509=IPC buffer too large. Connection closed.
510=The IPC buffer size cannot be zero or negative. Connection closed.
511=Unexpected IPC command or response. Connection closed.
512=Encryption error on the IPC channel. Connection closed.
513=Unknown response from the server.
514=Server settings:
515=IPC port: {0}
516=Language: {0}
517=Honeypot list: {0}
518=Bad IPC protocol. The client sent HELLO but received an unexpected response. Connection closed.
519=Global IP exclusions:
520=Could not retrieve the global settings.
521=Enter the new value for the field (press ENTER alone to abort the change):
522=IPC port (current value = {0}):
523=The port number must be a positive integer.
524=Illegal port number: {0}
525=Language (current value = "{0}"):
526=The server is restarting and you will be disconnected. Press ENTER to exit.
527=Bad argument or bad IPC status.
528=Language (current value = {0}):
529=Available languages:
530=No such language is available. Language values are case-sensitive.
531=The language has been changed.
532=Could not change the language: {0}
533=Operation aborted.
534=Existing lists:
535=Could not retrieve the list of existing lists.
536=Current honeypot list (current = {0}):
537=The list "{0}" does not exist. Do you want to create a new one with that name? ({1}/{2})
538=Enter the new list name (without path or extension). Example: NewList
539=If a list with that name already exists, it will be loaded. If it is new, it will be created and loaded.
540=Press ENTER alone to abort the change.
541=Current honeypot list: {0}
542=An error occurred while receiving the honeypot list: {0}
543=Honeypots:
544=Honeypot index: {0}
545=The list is empty.
546=Address: {0}
547=Port: {0}
548=Parallel execution: {0}
549=Enabled: {0}
550=Plugins:
551=No plugins.
552=Plugin index {0}: {1}
553=Extra exclusions:
554=No extra exclusions.
555=Extra exclusion index {0}: {1}
556=Add a new honeypot to the list "{0}". Press ENTER alone at any time to abort the operation.
557=Could not retrieve the current list.
558=Enter the port to listen on.
559=Illegal port. The port must be a positive integer.
560=The current list already contains a honeypot listening on that port.
561=Enter the network interface for this honeypot. Use "*" to listen on all available interfaces. Use "*6" to listen on all interfaces using IPv6.
562=Bad address format. Example formats: 127.0.0.1 or ::1
563=Create this honeypot enabled? ({0}/{1})
564=Execute all plugins in parallel? ({0}/{1})
565=If you have any IP exclusions (or ranges) in addition to those in the global settings, enter them here. When finished, enter a single dot (.)
566=Value added. Enter the next value or a single dot (.) to finish.
567=Wrong format. Enter a single IP address (e.g., 192.168.0.34 or 2001:db8:85a3::8a2e:370:7334) or a range (e.g., 192.168.0.0/24 or fe80::/10).
568=Enter a comma-separated list of plugin IDs to execute. Use * to execute all available plugins. Enter a single dot (.) when finished.
569=An error occurred while saving the current list: {0}
570=Loaded plugins:
571=No compatible plugins are loaded.
579=You must enter the index of the honeypot to edit. Example: "edit-honeypot 3"
580=The honeypot index must be an integer.
581=Cannot edit honeypot: index out of range.
582=Edit a honeypot from the list "{0}". Press ENTER alone at any time to abort the operation.
583=(Current value: {0})
584=The list of IP exclusions has been cleared and is now empty. The previous list contained:
585=The list of plugin IDs has been cleared and is now empty. The previous list contained:
586=Clear all honeypots from the current list "{0}"? ({1}/{2})
587=Could not list the files in the log directory: {0}
588=No log files found.
589=All old files have been deleted.
590=An error occurred while deleting the old log files: {0}
591=Do you really want to delete all old log files? The current log will be kept. ({0}/{1})
592=Do you really want to delete the current log file? A new empty file will be created. ({0}/{1})
593=The current log file has been deleted.
594=An error occurred while deleting the current log file: {0}
595=These are the latest entries in the current log file (maximum {0} lines shown).
596=The current log file appears to be empty.
597=An error occurred while receiving the tail of the current log file: {0}
598=The log files could not be enumerated: {0}
599=The encoded information is corrupted.
600=You must enter the plugin ID as the first argument.
601=This plugin has no external settings.
602=Enter the settings as a JSON string. Enter a single dot (.) on its own line to finish. An empty string aborts the operation.
603=The settings for the specified plugin were NOT updated: {0}
604=Your program is up to date.
605=Your version: {0}
606=Available version: {0}
607=Publishing date: {0}
608=Details:
609=An error occurred while checking for updates: {0}
610=Checking for updates. Please wait...
611=Vital directories for the service/daemon:
612=Vital directories for the client:
613=Application folder: {0}
614=Language folder: {0}
615=Local data folder: {0}
616=Temporary folder: {0}
617=Add to the global list of exclusions. Enter a single dot (.) on its own line to finish. An empty string aborts the operation. 
618=The current list contains:
619=Illegal IP address or IP range. Use the CIDR notation for ranges.
620=Do you really want to clear the list with exclusions? ({0}/{1})
621=Enter the numbers of the exclusion to delete, one at a time. Enter a single dot (.) on its own line to finish. An empty string aborts the operation. 
623=Incorrect index.
624=Exclusion removed. Enter the next exclusion to remove or enter a single dot (.).
625=Do you really want to reset the settings to its default values? Event he global list with exclusions will be reset. ({0}/{1}) 
626=Incorrect choice. ({0}/{1})
2000=Automatically blocks an IP address or range of addresses. Windows only.
2001=Blocking IP address(es) {0} on all ports for all protocols.
2002=Blocking IP address(es) {0} on all ports for the TCP protocol.
2003=Blocking IP address(es) {0} on port {1} for the UDP protocol.
2004=Blocking IP address(es) {0} on port {1} for the TCP protocol.
2005=Could not start the firewall process.
2006=An exception occurred while starting the firewall or updating its rules: {0}
2007=Could not add the rule to the firewall. Exit code: {0}
2008=Blocking IP address(es) {0} on TCP ports {1}–{2}.
2009=Blocking IP address(es) {0} on all ports for the UDP protocol.
3000=Automatically blocks an IP address or range of addresses. Linux only. Uncomplicated firewall (ufw) must be installed and enabled.
3001=Blocking address(es) {0} on port {1} for all protocols.
3002=Blocking address(es) {0} on port {1} for TCP.
3003=Blocking address(es) {0} on all ports and all protocols.
3004=Blocking address(es) {0} on all ports for TCP.
3005=Blocking address(es) {0} on ports {1}–{2} for TCP.
3006=Blocking address(es) {0} on all ports for UDP.
3007=Could not execute the firewall binary (ufw).
3008=An error occurred while inserting the firewall rule. Exit code: {0}
3009=An error occurred while inserting the firewall rule: {0}
10000=
10001=Help file. All commands are case-sensitive.
10002=
10003=help – Shows this help file.
10004=quit – Exits the program. Same as "exit".
10005=exit – Exits the program. Same as "quit".
10006=clear – Clears the screen.
10007=get-settings – Shows the global program settings.
10008=set-ipc-port – Changes the IPC port. The server will be restarted.
10009=set-language – Changes the application language.
10010=set-list – Changes the active honeypot list. You may use an existing list or create a new one. The server will be restarted.
10011=get-list – Shows the content of the current list.
10012=add-honeypot – Adds a honeypot to the current list. The server will be restarted.
10013=edit-honeypot – Edits the honeypot with the specified index (shown via show-list). Example: "edit-honeypot 3". The server will be restarted.
10014=clear-list – Clears all honeypots from the current list. The server will be restarted.
10015=list-logs – Lists the log files.
10016=delete-old-logs – Deletes all old log files (current one is kept).
10017=delete-current-log – Deletes and recreates the current log file (clears it).
10018=show-log-tail – Shows the last 20 entries in the current log file.
10019=get-plugin-settings – Retrieves the settings of a plugin. First argument must be the plugin ID.
10020=set-plugin-settings – Sets the settings for a plugin. First argument must be the plugin ID.
10021=restart-server – Stops and restarts the server.
10022=check-for-updates – Checks for newer versions.
10023=list-server-directories – Shows all vital directories on the server (daemon) side.
10024=list-client-directories – Shows all vital directories on the client side.
10025=version - Shows the program version.
10026=add-exclusion - Add one or several addresses to the global exclusions for the settings.
10027=clear-exclusions - Clear the list with global exclusions.
10028=delete-exclusion - Delete one or more global exclusions.
10029=reset-settings - Set the settings to its default values.
10030=list-plugins - Show all the available plugins and its properties.